Skip to main content
Philadelphia skyline

How Much Does Concrete Patio Installation Cost in Philadelphia?

$4,631typical · fair range $4,165 to $5,133

This price is for a standard Concrete Patio in Philadelphia. See other outdoor living & hardscapes service prices ↓

That is the modeled cost to deliver plus a fair contractor margin, not a sales quote. Built from BLS metro wages, Craftsman labor hours, a real bill of materials, and hand-verified permit data. 2026-08-28

Got a contractor quote? Check it against this number
$
Show the math
How $4,631 is built
Labor$1,276
Materials$1,585
Direct cost$2,861
Overhead (20% of revenue)$945
Cost to deliver (break even)$3,806
Contractor margin (17.8%)$825
Typical fair price$4,631

The margin is the gap between break even and a typical quote, not a markup we invent. Fair margin moves with trade and market. Most land at a 15 to 22 percent margin on the bid, roughly 18 to 28 percent over the cost to deliver, and free labor does not exist. Full methodology.

$4,631
Typical installed
22hrs
Skilled labor
17.8%
Contractor margin
14.0% over
vs national avg

Is your outdoor living & hardscapes bid fair?

Cost index by David Olson · reviewed by Leonard "Chuck" Thompson · 2026-08-28
Independent FatBook v3 cost indexVerified permit/source data where availableReviewed by Leonard "Chuck" Thompson
$
Type the number off the estimate, or drag the bar. The gauge below shows where it lands.
Or
Upload contractor estimate
Drag and drop or click here. PDF or CSV, we extract the line items.
Or paste it
Analyzed estimates are stored anonymized (names, addresses, phone numbers, and emails stripped) to improve the benchmark. No account, no tracking.
Philadelphia
Within the fair range.
Fair range
Fair range$4,165 to $5,133
Typical market bid$4,631
Lowest realistic price$4,165
Your bid$4,631
Gap to the price floor$466
Contractor margin17.8%
Fair range. Cost to deliver is the break-even, the red line on the gauge, not the price to demand. A fair bid sits in the green band above it: most jobs land at a 15 to 22 percent margin on the bid, roughly 18 to 28 percent over the cost to deliver, leaner or richer by trade and market. Contractors earn that, and they should: nobody works for free, and if the job were easy you would not need one.

Calculate your Philadelphia true cost.

sq ft
Technical Blueprint LIVE SCHEMA
Outdoor living estimate schematic FORMBOARD FRAME 4" SLAB DEPTH Concrete slab footprint: -- sq ft
True Cost Benchmark
$4,631
Typical range: $4,165 to $5,133 · Lowest realistic price: $4,165
Labor$1,276
Materials (PPI-adjusted)$1,585
Overhead (20.4%)$945
Cost to deliver$3,806
Labor derivation: 22.0 Craftsman hours × $40.86/hr BLS wage × 1.42 burden = $1,276.
Potential savings $466. That is the gap between the true cost benchmark and the lowest realistic price.
Concrete Patio Installation in Philadelphia costs more than most U.S. metros. At $4,631, you're paying 14% above the national average, though contractor margins here (17.8%) are in the moderate range. The higher price reflects regional labor costs, not excessive padding. Your negotiation strategy should focus on scope, not price-slashing.
Standard market dynamics. Philadelphia runs 17.8% margins with a normal spread from $4,165 to $5,133. You have about $466 in negotiating room. The most effective approach: check any bid against the numbers on this page, identify the line items sitting above the benchmark, and negotiate those specific items down toward the floor of $4,165.
The calendar is part of the price. Quotes for outdoor living & hardscapes in Philadelphia sit near the $5,133 high during the warm-weather stretch (April through October) and drift toward the $4,165 floor through winter (December through February), when crews compete for thinner work. That seasonal spread is 5 to 12 percent, or $232 to $556 on a job this size, for anyone who can plan around it.
With $466 between the average and the floor, Philadelphia has a relatively modest negotiation window, about 10% of the total job cost. This doesn't mean negotiation is pointless: on a $4,631 job, even 10% savings is real money. But the bigger wins here come from scope optimization and timing, not from beating contractors down on price.
Philadelphia sits in the upper half of our pricing index, more expensive than 30 of 39 tracked metros but cheaper than 8. This mid-to-upper position reflects moderate regional labor costs. The $466 gap between average and floor pricing is where your negotiating power lives.
Show the math: how Philadelphia Concrete Patio Installation numbers are derived Click to expand
Derivation for Philadelphia, Concrete Patio Installation · updated 2026-08-28
Step 1: Craftsman labor hours
BOM hours from Craftsman National Estimator: 22 hrs (typical project: 400 sq ft)
Step 2: BLS wage × burden
Philadelphia wage from BLS OES: $40.86/hr
Burden rate (FICA + workers' comp + insurance + unemployment): 42.0%
loaded_wage = $40.86 × 1.4200 = $58.02/hr
Step 3: Labor cost
labor = 22 hrs × $58.02/hr = $1,276
Step 4: Materials (PPI-adjusted)
Craftsman material cost × FRED PPI multiplier (1.0218): $1,585
Materials carry no markup here. Book prices get adjusted to the current market with producer price indexes.
Step 5: Permit fee
Philadelphia: $0
No standalone permit line in the model for this scope in Philadelphia. Common exemptions cover cosmetic and finish work and in-kind replacement, but some cities charge separate flat-fee trade permits instead, so confirm with the local permit office. Source: our compiled city fee schedules.
Step 6: Direct cost
direct = labor + materials + permit = $1,276 + $1,585 + $0 = $2,861
Step 7: Overhead
NAHB benchmark: overhead is 20.4% of revenue, the way the NAHB Cost of Doing Business study measures it. Materials pass through at cost and carry no overhead.
overhead = ~20.4% of revenue (NAHB basis) = $945
Step 8: Cost to deliver
cost_to_deliver = direct + overhead = $2,861 + $945 = $3,806
What it actually costs a contractor to do this job in Philadelphia, before profit.
Step 9: Lowest realistic price
Cost to deliver plus the leanest sustainable margin in Philadelphia for this scope: $4,165
The floor clears cost-to-deliver, as it should: nobody stays in business below break-even.
Step 10: Typical contractor quote
The modeled typical quote in Philadelphia, cost to deliver plus the market's usual margin: $4,631
Step 11: Contractor margin
margin = ($4,631 - $3,806) / $4,631 × 100 = 17.8%
The portion of the typical quote that is not cost-to-deliver. Higher = more room to negotiate.
Step 12: Savings potential
savings = $4,631 - $4,165 = $466
The gap between the typical quote and the lowest likely estimate in Philadelphia.
One parts list prices every service in every metro. Sources: BLS OES wages, FRED PPI series, Craftsman National Estimator, city permit offices. Updated 2026-08-28. Full methodology →
How the cost breaks down

What you pay for in Philadelphia.

Every outdoor living & hardscapes dollar in Philadelphia, split into labor, materials, permit, overhead, and the contractor margin. The first four are the cost to deliver. Margin is the earned part on top.

Labor$1,276 (27.6%)
Materials$1,585 (34.2%)
Overhead$945 (20.4%)
Margin$825 (17.8%)
Cost to deliver plus a fair margin = $4,631
A outdoor living & hardscapes job in Philadelphia
Fig. Outdoor Living & Hardscapes work in Philadelphia: the 22 hours priced above.
See cost by project size

What concrete patio installation costs at your size.

Scales with project area at this metro's rate. The calculator lets you dial in your exact size.

SizeTypicalRange
250 sq ft$3,326$2,991 to $3,686
300 sq ft$3,761$3,382 to $4,168
400 sq ft$4,631$4,165 to $5,133
500 sq ft$5,501$4,947 to $6,097
600 sq ft$6,371$5,730 to $7,062

Scaled from TheFatBook's per-size cost model, the same one behind the calculator.

How we size these jobs →

The Philadelphia guide

Philadelphia concrete patio installation runs $4,631 on average. That sits 14 percent above the national average. I found this spread while building TheFatBook Cost Index (built from BLS wage and Craftsman labor data) from local wages and tracked material prices. The numbers show real pressure from the city's old housing stock and winter limits on exterior work. This page gives you the floor price the data supports plus a way to check any bid you receive.

City average
$4,631 for concrete patio installation, 14.0% above the national average of $4,063 (TheFatBook cost index, 2026)
Bid range
$4,165 low to $5,133 high, with the lowest realistic price at $4,165 (TheFatBook cost index, 2026)
Contractor margin
17.8% contractor margin, with $466 between average price and floor (TheFatBook cost index, 2026)
Labor hours
22 hours for concrete patio installation (Craftsman, 2026)
Labor cost
$1,276 labor, at $58.02/hr loaded wage ($40.86 base + 42.00% burden) (BLS OEWS, 2026)
Materials
$1,585 material cost (PPI adjusted) (FRED PPI, 2026)
Permit fee
$0 (no standalone permit for this scope; local taxes or trade fees may still apply at issuance) (PermitCalculator, 2026)
Overhead
$945 covering overhead allocation (NAHB, 2026)
Cost to deliver
$3,806 fully loaded, before the contractor's margin (TheFatBook cost index, 2026)

Local Market

Philadelphia shows a 1.9 percent population decline yet median home values hover near $232,400 (TheFatBook cost index, 2026). This creates high affordability and steady renovation demand from owners who stay put. TheFatBook Cost Index (built from BLS wage and Craftsman labor data) puts concrete patio installation at $4,631 on average here. That figure comes from 22 craftsman hours at a loaded wage of $58.02 per hour plus $1,585 in materials. Contractors face real limits from severe winter cold waves that shut down pours for months. The 17.8 percent contractor margin sits a bit below what I see in hotter growth markets. Local BLS wage input drives the labor piece while FRED PPI keeps the concrete and rebar costs current. Homeowners here pay for that seasonal squeeze. The data reveals why bids feel higher than national numbers even with no standalone permit fee. (TheFatBook cost index, 2026)

Chuck's Take

about eighteen percent margin in a city losing population at about two percent. That tells me contractors hold the cards right now. The wage rate looks solid but winter shut downs limit how many patios a crew can pour. If this were my money I'd lock in a bid before spring demand spikes again.

Understanding Your Bid

Your bid lands at $4,631 on average for a 400 square foot concrete patio (TheFatBook cost index, 2026). The cost to deliver sits at $3,806. That produces the 17.8 percent contractor margin we track. The verified floor of $4,165 leaves $466 of potential savings between the average and the lowest realistic price. Not every bid above $4,165 is a ripoff. Some contractors simply carry higher overhead or bid for speed. But anything north of $5,133 starts to look off given the $0 permit and straightforward 22 hours of work. I built the index so you can separate hard earned margin from fat. Run the numbers yourself before you sign.

Cost Breakdown

The concrete patio breaks down cleanly in TheFatBook Cost Index (built from BLS wage and Craftsman labor data). Labor eats $1,276 using 22 craftsman hours at the local loaded wage of $58.02 per hour. That loaded rate starts from a $40.86 base BLS wage plus 42 percent burden for taxes and insurance. Materials add $1,585 after FRED PPI adjustment for cement and reinforcement. Permit fee shows $0 since no standalone permit applies though local taxes may still hit at issuance. Overhead allocation reaches $945 per NAHB benchmarks. Add it up and you get the $3,806 cost to deliver before any margin. Pre-1978 lead paint hazards in older Philadelphia housing can add lead-safe RRP handling costs if the work disturbs painted surfaces on an older structure. Zero debate. The floor price of $4,165 reflects the leanest sustainable margin in this market. (BLS OEWS wage input) (FRED PPI, 2026)

Chuck's Take

Twenty two hours for a four hundred foot patio sounds about right. I've poured plenty and that matches what a good crew needs for the dig, forms, reinforcement and finish. The loaded wage near fifty eight an hour tracks with what I see in older cities. Ignore that number and you'll pay for mistakes when the crew has to come back.

How to Negotiate

Shop your concrete patio bid in late fall or early spring in Philadelphia. Severe winter cold waves slow the entire trade so contractors hunt work harder when pours become possible again. Know the $4,165 floor and the $3,806 cost to deliver before you sit down with any contractor. That knowledge changes the conversation from defense to facts. Run your specific bid through the Bid Fairness Checker on this page first. It takes thirty seconds and shows exactly where your number sits against the index. Ask the contractor to break out labor hours and material quantities instead of lump sums. Push back on anything that exceeds the $5,133 high without clear extras. Timing beats desperation every time here.

Chuck's Take

Red flag for me is any bid that skips the winter timing talk. A fair contractor explains why he can pour in March but not January and adjusts the price accordingly. In Philadelphia that conversation matters because cold waves stop everything. Take the bid that shows real planning and walk from the rest.

What Makes This Market Different

Philadelphia's vast pre-war housing stock built before 1945 changes everything for concrete patio work. Contractors run into odd lot lines, buried rubble foundations and utility surprises that national numbers never capture. The 53.2 percent home ownership rate keeps demand solid across income levels yet the 1.9 percent population decline means fewer new builders entering the market. That leaves established crews with pricing power on outdoor jobs. Lead paint on pre-1978 structures can trigger lead-safe RRP work practices when a job disturbs painted surfaces on the house. I didn't expect the $0 permit to still leave the average 14 percent above national. The old housing stock simply demands more care and that shows up in every bid. TheFatBook Cost Index (built from BLS wage and Craftsman labor data) makes this visible. Other cities with newer stock simply don't carry the same hidden friction.

Frequently Asked Questions

How much does concrete patio installation cost in Philadelphia?
The average price for concrete patio installation in Philadelphia is $4,631 according to our local Cost Index. The lowest realistic price sits at $4,165 while the high end reaches $5,133. Our proprietary cost database shows these figures include 22 craftsman hours at the local loaded wage.
What's the lowest realistic price for a concrete patio in Philadelphia?
The lowest realistic price for concrete patio installation in Philadelphia is $4,165. This floor comes from the cost to deliver of $3,806 plus the leanest sustainable margin for the local market. Our proprietary cost database shows $466 separates that floor from the city average of $4,631.
How many labor hours does a typical concrete patio require in Philadelphia?
A typical 400 square foot concrete patio requires 22 craftsman hours in TheFatBook Cost Index (built from BLS wage and Craftsman labor data). At the local loaded wage of $58.02 per hour that produces $1,276 in labor cost. Our local Cost Index builds this from Craftsman hours and BLS regional wages.
Why are concrete patio bids higher in Philadelphia than national averages?
Concrete patio bids average 14 percent above the national $4,063 because of the city's pre-1978 housing stock and winter cold wave limits. Lead-safe RRP handling can add cost when work disturbs painted surfaces on older structures. Our proprietary cost database shows these local realities push the Philadelphia average to $4,631.

TheFatBook models outdoor living & hardscapes from Craftsman labor hours, BLS regional wages, burden, PPI-adjusted materials, permit data where available, and contractor overhead benchmarks. Cost index version: 2026-08-28. Updated Aug 2026.

Sources: BLS, Craftsman, FRED
Reference URLs: BLS OEWS · FRED PPI
Reviewed by: Leonard "Chuck" Thompson
Read methodology →
Sources & methodology for these numbers
  • Independent FatBook v3 cost index for Outdoor Living & Hardscapes in Philadelphia.
  • BLS OEWS wage inputs (https://www.bls.gov/oes/) and FRED PPI material inflation (https://fred.stlouisfed.org/) references.
  • Craftsman labor-hour references and contractor overhead benchmarks.
  • Verified permit/source data from PermitCalculator.com and permits_compiled where available.
Cost-index version: 2026-08-28
Updated: Aug 2026
Sources: BLS, Craftsman, FRED
Reviewed by: Leonard "Chuck" Thompson

What the outdoor living & hardscapes in philadelphia benchmark includes.

Included in the benchmark
  • Concrete Patio Installation as the headline cost-index scope
  • labor-hour assumptions, regional wage inputs, materials, overhead, and permit data where available
  • low, average, high, lowest realistic price, margin, and savings benchmarks from the FatBook cost index
Not included automatically
  • hidden damage, change orders, emergency service premiums, or unusual site access conditions
  • contractor financing approval, warranties, provider recommendations, or guaranteed final quotes
  • permit rulings for a specific address unless the city permit panel lists verified local data
Scope methodology →
Chart of outdoor living costs in Philadelphia, July 2026: Deck Construction Composite averages $12,426; Deck Construction Pressure Treated averages $8,166; Concrete Patio Installation averages $4,255. Source: TheFatBook Cost Index.
Typical outdoor living & hardscapes costs in Philadelphia: low, average, and high for the most common services. Source: TheFatBook Cost Index. The full line-item table is below.
Embed this chart on your site (free, with attribution)
ServiceLowAverageHigh
Concrete Patio Installation · 400 sqft$4,165$4,631$5,133
Concrete Driveway Installation · 400 sqft$4,149$4,613$5,113
Concrete Sidewalk Installation · 400 sqft$4,338$4,824$5,346
Stamped Concrete Patio · 400 sqft$7,957$8,848$9,807
Concrete Slab (Garage/Addition) · 400 sqft$4,234$4,700$5,202
Concrete Driveway Replacement · 400 sqft$5,685$6,321$7,006
Concrete Slab Demolition$1,586$1,748$2,104
Retaining Wall Installation · 120 sqft$5,671$6,305$6,989
Paver Patio Installation · 300 sqft$6,796$7,557$8,376
Paver Driveway Installation · 600 sqft$13,515$15,028$16,656
Asphalt Driveway Installation · 600 sqft$5,755$6,399$7,092
Tree Removal (Small, 8-12 in trunk)$766$844$1,007
Tree Removal (Medium, 13-18 in trunk)$1,067$1,176$1,404
Tree Removal (Large, 19-24 in trunk)$1,756$1,936$2,288
Tree Removal (X-Large, 25-36 in trunk)$2,440$2,690$3,171
Shrub & Bush Removal (each, incl. stump)$321$354$421
Brush & Debris Hauling (per load)$649$715$861
Stump Grinding$456$503$606
Deck Demolition$2,420$2,642$2,882
Deck Construction Pressure Treated · 240 sqft$7,626$8,473$9,384
Deck Construction Cedar · 240 sqft$11,237$12,488$13,834
Deck Construction Composite · 240 sqft$11,777$13,089$14,500
Deck Railing Installation · 40 linear ft$1,845$2,043$2,257
Pergola Installation · 100 sqft$5,369$5,962$6,601
Patio Cover Installation$5,724$6,357$7,039
Deck Repair$1,993$2,216$2,589
Wood Privacy Fence Installation · 150 linear ft$5,309$5,903$6,543
Vinyl Fence Installation · 150 linear ft$8,041$8,941$9,910
Gazebo Installation$7,344$8,158$9,035
Shed Installation$5,024$5,587$6,192
Fire Pit Installation$2,312$2,563$2,833
Outdoor Kitchen Installation$7,502$8,334$9,229

Before you get bids in Philadelphia.

Concrete cost calculator
Installed slab, driveway, and patio pricing for your metro, plus bag and ready-mix math for a DIY pour.
Open concrete cost calculator →
Deck cost calculator
Price a pressure-treated, cedar, or composite deck by your real dimensions, with stairs and railing itemized.
Open deck cost calculator →
Fence cost calculator
Five materials priced at your exact run length, side by side, with removal and permit fees included.
Open fence cost calculator →
Driveway cost calculator
Gravel, asphalt, concrete, and pavers priced side by side at your exact dimensions.
Open driveway cost calculator →

Philadelphia permits.

Structure
Philadelphia minor-alteration residential permits (owner-occupied 1-2 family): roof covering $69, exterior wall covering (siding) $69, window/door replacement requires a permit only if historic, deck/porch flooring (<=200 sq ft) $63, HVAC appliance changeout $69, electrical work $25/$1,000 (min $63), general demolition $25.30/100 sq ft (min $253). Full alterations are $76 per 500 sq ft or 2% of cost (min $253).
Department
City of Philadelphia Department of Licenses and Inspections (L&I)
Phone
311 (general information, referenced in code)
Verified
2026-07-24
Fee Anchors
$8k building fee: $253
$12k building fee: $253
$25k building fee: $500
Electrical base: $63
Plumbing base: $63
HVAC base: $69

Source-backed permit facts from PermitCalculator.com and the underlying permits_compiled dataset. Always confirm final requirements with the local building department before filing.

Got a bid? We'll check it.

Upload a contractor estimate
Drag & drop or click to upload. We'll analyze every line item.
PDF · CSV · JPG · PNG · Max 10MB

Payment options.

$
%
yr
%
Best financing option
-
Also in Philadelphia: 5 other trades
Check a Philadelphia quote
See if your quote falls within the verified fair range for Philadelphia.
Run the Calculator →
Compare nearby markets
New York
$5,580 avg · $618 potential savings
Baltimore
$3,881 avg · $349 potential savings
Richmond
$3,718 avg · $355 potential savings
Boston
$4,782 avg · $538 potential savings
View all 39 cities →
DO
Cost index built by David Olson, Creator of the Cost Index & Permit Dataset · Methodology reviewed by Leonard "Chuck" Thompson, LC Thompson Construction Co., Owner (retired) · 2026-08-28
Check my bidCalculate true costUpload estimate